Recommending a made-to-measure shirtmaker comes with a lot of caveats, which makes them tough to review. Fit is, of course, paramount, but once you’ve got a well-fitting shirt in your wardrobe, you can take your measurements from the shirt nearly anywhere.
Provided you’ve got a shirt you’re happy with in terms of fit, then you can look for a shirtmaker who has the fabrics and options you want in a shirt. CottonWork has these in spades and the shirt they allowed me to make for a review has the characteristics I’d encourage anyone to look for in their MTM shirting.
Let’s start at the beginning. If you have a well-fitting shirt, then you can simple take measurements off that shirt and input them at CottonWork. This is my recommended method. And if you don’t have a tape measure, CottonWork will give you a free starter kit that has a tape measure and several fabric swatches.
From that point forward, it’s a fairly standard process that those of you who’ve done MTM shirting online will recognize. You pick you fabric and use a shirt builder that gives you a live preview of your order’s details.
On the topic of fabric, CottonWork offers a wide variety, starting at $45 for cotton-blends to fabrics from renowned mills Thomas Mason and Tessitura Monti that range north of $200. For those wondering if there’s a discernible difference for a high end fabric, I’d argue that there is after receiving my shirt made from a Thomas Mason oxford cloth. There’s a refinement to the fabric and a softness that’s unlike what I’ve seen elsewhere.
While I kept it fairly predictable in terms of fabric choice — as many of you know, solid blue is often my preference — I decided to make some slight straying choices from what I typically prefer. Instead of my preference for a placket front, I went with a French front and also pocket-less, too, as I intended for this to be worn with suits in a slightly more formal look.
For the shirt’s collar, I went with a spread collar and I really love how soft the collar is around the neck. It’s not stiff and doesn’t feel like cardboard’s inside like some shirt collars. You’ll also notice the buttons on the shirt are mother-of-pearl, which is a nice touch that’s often an option you have to pay extra for at most MTM shirting places, but not CottonWork.
The collar has a decent roll when worn with a necktie. I will admit that while I like that it has removable collar stays, I prefer to not wear collar stays to make the collar a bit more soft in appearance. Well-made collars and a necktie should work just fine most of the time to keep things upright. This collar might very well be the most comfortable shirt collar I’ve had outside of my Brooks Brothers OCBDs.
In terms of construction, it’s worth pointing out that all CottonWork shirts are single-needle stitched with 22 stitches per inch. I don’t know if you’ve ever tried to count stitches in an inch, but it’s a pain in the ass. And, yes, I did count them on my shirt and their claim holds up, in case you were wondering.
CottonWork also offers an optional split-back yoke. Several other MTM operations require you pay extra for this, but it’s a free option at CottonWork. If you’re not familiar with split-back yokes, the reason for this preference is one of better fit across the shoulder. With the fabric at a diagonal in a split yoke, it stretches better when you move your arms out, but it’s also more expensive for the shirtmaker to produce. (You can read more about split-back yokes here.)
For cuffs, I went with what CottonWorks described as a Neapolitan cuff. I wasn’t sure if I’d like the style as it’s a bit flashy, but worn under a jacket it’s less obvious. Cuff construction is a bit more substantial than the collar and the sleeve features a gauntlet button, too.
Of course, monogramming is available. I opted for the collar, so it would be hidden, but you can opt for the chest, cuffs or placket, too. I don’t typically wear monogrammed items, but I figured it’d be worth showing those reading this review what it looks like. If you don’t like scripted fonts, you should know they have two other scripted fonts and a sans-serif block font available.
In terms of fit, I’m pleased with it after a wash and iron. I wore the shirt out on Friday evening and didn’t find any issues in regards to fit with it. My latest MTM shirts have been slightly fuller in the upper torso to allow for movement, but I’ve had them aggressively taper at the waist. While I don’t typically like to wear a dress shirt sans a jacket, this does help balance comfort against “puffy shirt waist” syndrome.
Because I used measurements off another MTM shirt I’d gotten after visiting a tailor in person, a lot of the finer measurement problems had been worked out after a few trials and adjustments. CottonWork did a good job of replicating the shirts I had already in my wardrobe.
If you’re concerned about getting an ill-fitting shirt, then let me recommend you go with one of their $45 fabrics first to see how it fits as a test shirt. I’ve often found it takes several trials before dialing in your fit on a MTM shirt — especially if you’re basing measurements off your body instead of a well-fitting shirt. Alternatively, you can send in your best fitting shirt for CottonWork to replicate, too.
So, if you’re looking for a MTM shirtmaker that does quality construction, can easily replicate the fit of your best shirt and give you a wide breadth of optional details, then check out CottonWork. To date, they’ve been the most impressive online-only MTM experience I’ve had and have matched the in-person MTM shirtmakers I’ve used in the past with their quality of work.
- fromtroywithlove likes this
- cytacc likes this
- wtfisdaisha likes this
- marcusbailey reblogged this from thesilentist
- paymank likes this
- satorialconnoisseur reblogged this from thesilentist
- iamzeejay likes this
- boltfashionginger likes this
- maineinterest likes this
- coreybjames likes this
- sbcpacker4life likes this
- sdwannabe likes this
- yesterdayusaidtmrw likes this
- gentlemen007 reblogged this from welldressedman
- xphaqtor likes this
- nestorarnel likes this
- welldressedman reblogged this from thesilentist
- dandeast reblogged this from thesilentist
- affably-evil likes this
- pooppeepop likes this
- geezerstyle likes this
- alcryb likes this
- alifesuited reblogged this from thesilentist
- peacockmagpie reblogged this from thesilentist
- cottonwork likes this
- equalsanctuary likes this
- paolomanaloto likes this
- badius likes this
- thisfits likes this
- subsetofme reblogged this from thesilentist
- dyeboy likes this
- danielpryde likes this
- fina-estampa-caballero reblogged this from thesilentist
- tk3scixx likes this
- notyourbatmans likes this
- dude2dapper reblogged this from thesilentist
- elijahlain likes this
- les-and-moore likes this
- brian-m likes this
- sashu reblogged this from thesilentist and added:
- sashu said: Awesome review!
- kvencill likes this
- pxrxb likes this
- omgerald likes this
- patrickhumphreys likes this
- weformlikevoltron likes this
- acuteobtuse likes this
- tommyschronicle likes this
- intelligentdasein likes this